Glazing
Reykjavik Eyes Glazing Guidelines
Glazing Recommendations
Glazing & Assembley Guidelines
- Using a Trivex/Polycarbonate lens, however a 1.6, 1.67 or 1.74 index lens can be used.
- Tracing the supplied demo lens.
- A standard inline supra glaze with a minimum lens thickness of 2.2mm.
- A 0.8mm groove depth and a 0.55mm groove width.
- A 0.8mm thickness either side of the groove.
- Inserting the lens using the supra ribbon/cord supplied with the frame
We do not recommend using CR39 or a 1.56 index lens.
Rimless Recommendations
Rimless Glazing & Assembly Guidelines
- Use a nylon coated plier to remove the demo lenses.
- Remove any residue off the nylon plugs, bridge pins, screws and end pieces, taking care not to damage them.
- For each model axis and hole position please view the PDF on the link below.
- Use the original nylon plugs supplied to assemble the correction lenses or sun lenses.
- Assemble all the components using a plier with plastic inserts to prevent damaging the lens.
- We do not recommend using CR39 or a 1.56 index lens.
We do recommend using a 1.59 polycarbonate or 1.61 MR8 lens as standard for all rimless frames.
Care should be taken if using acetone on a 1.59 polycarbonate lens.